[uClinux-dev] [RFC/PATCH] m68knommu: Add clk definitions for m532x.

Greg Ungerer

2012-06-18 05:06:35 UTC

Hi Steven,

Post by Steven King
The 532x has individually controllable clocks for it peripherals. Add clk
definitions for these and add default initialization of either enabled or
disabled.
Signed-off-by: Steven King<sfking at fdwdc.com>
---
arch/m68k/include/asm/m532xsim.h | 14 ++++
arch/m68k/platform/coldfire/m532x.c | 139 ++++++++++++++++++++++++++++++++++-
2 files changed, 152 insertions(+), 1 deletion(-)
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 8d86020..5ca7b29 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -138,6 +138,20 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
+
+/*
+ * Power Management
+ */
+#define MCFPM_WCR 0xfc040013
+#define MCFPM_PPMSR0 0xfc04002c
+#define MCFPM_PPMCR0 0xfc04002d
+#define MCFPM_PPMSR1 0xfc04002e
+#define MCFPM_PPMCR1 0xfc04002f
+#define MCFPM_PPMHR0 0xfc040030
+#define MCFPM_PPMLR0 0xfc040034
+#define MCFPM_PPMHR1 0xfc040038
+#define MCFPM_LPCR 0xec090007

Do these definitions have anything to do the the clocks?
I don't see them used anywhere in this patch?

This applies to the m520x clock patch to I think.

Regards
Greg

Post by Steven King
/*********************************************************************
*
* Inter-IC (I2C) Module
diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m532x.c
index 21d6cb1..97107a8 100644
--- a/arch/m68k/platform/coldfire/m532x.c
+++ b/arch/m68k/platform/coldfire/m532x.c
@@ -27,6 +27,143 @@
#include<asm/mcfuart.h>
#include<asm/mcfdma.h>
#include<asm/mcfwdebug.h>
+#include<asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfpwm.0", 36, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 38, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcflcd.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "sdram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "ssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+
+DEFINE_CLK(1, "mdha.0", 32, MCF_CLK);
+DEFINE_CLK(1, "skha.0", 33, MCF_CLK);
+DEFINE_CLK(1, "rng.0", 34, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_8, /* mcfcan.0 */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_19, /* intc.1 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_34, /* mcfpit.2 */
+ &__clk_0_35, /* mcfpit.3 */
+ &__clk_0_36, /* mcfpwm.0 */
+ &__clk_0_37, /* mcfeport.0 */
+ &__clk_0_38, /* mcfwdt.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_42, /* mcfrtc.0 */
+ &__clk_0_43, /* mcflcd.0 */
+ &__clk_0_44, /* mcfusb-otg.0 */
+ &__clk_0_45, /* mcfusb-host.0 */
+ &__clk_0_46, /* sdram.0 */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_0_48, /* pll.0 */
+
+ &__clk_1_32, /* mdha.0 */
+ &__clk_1_33, /* skha.0 */
+ &__clk_1_34, /* rng.0 */
+ NULL,
+};
+
+static struct clk * const enable_clks[] __initconst = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_19, /* intc.1 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_37, /* mcfeport.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_46, /* sdram.0 */
+ &__clk_0_48, /* pll.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+ &__clk_0_8, /* mcfcan.0 */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+ &__clk_0_34, /* mcfpit.2 */
+ &__clk_0_35, /* mcfpit.3 */
+ &__clk_0_36, /* mcfpwm.0 */
+ &__clk_0_38, /* mcfwdt.0 */
+ &__clk_0_42, /* mcfrtc.0 */
+ &__clk_0_43, /* mcflcd.0 */
+ &__clk_0_44, /* mcfusb-otg.0 */
+ &__clk_0_45, /* mcfusb-host.0 */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_1_32, /* mdha.0 */
+ &__clk_1_33, /* skha.0 */
+ &__clk_1_34, /* rng.0 */
+};
+
+
+static void __init m532x_clk_init(void)
+{
+ unsigned i;
+
+ /* make sure these clocks are enabled */
+ for (i = 0; i< ARRAY_SIZE(enable_clks); ++i)
+ __clk_init_enabled(enable_clks[i]);
+ /* make sure these clocks are disabled */
+ for (i = 0; i< ARRAY_SIZE(disable_clks); ++i)
+ __clk_init_disabled(disable_clks[i]);
+}
/***************************************************************************/
@@ -73,7 +210,7 @@ void __init config_BSP(char *commandp, int size)
memset(commandp, 0, size);
}
#endif
-
+ m532x_clk_init();
mach_sched_init = hw_timer_init;
m532x_uarts_init();
m532x_fec_init();

--
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: gerg at snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com